Ankle Brace 2-Pack, Sleeve + Strap

$24.99

A knit ankle brace that pulls on like a sock, with a separate figure-8 strap for the days you want more hold — and two of each in the box.

Knitted In One Piece The Strap Is The Adjustment Nothing Ridged Under The Sole Two Sleeves, Two Straps
Quantity
1
Size·S

Free U.S. shipping · 30-day returns

Almost everyone buys one ankle brace. Then, about three weeks in, they want a second — for the other side, or simply because the first one is hanging over the radiator. This is two. Two knit sleeves and two adjustable straps, so there is always a dry ankle brace in the drawer.

Each sleeve is a single piece of copper-infused nylon knit with ten per cent spandex, shaped on a 3D knitting machine rather than cut and sewn flat. That shows up at the heel. The ankle brace pulls on like a sock, the heel comes out through a round opening at the back, the toes stay free at the front, and there is no seam ridge running under the sole for you to notice at mile two.

The knit changes density as it goes. Ribbed panels sit over the arch and around the ankle bone, lighter open mesh across the front where the foot has to hinge. So the ankle brace holds firmly in the two places you want held, and stays out of the way everywhere else — which is really the only reason a knit ankle brace gets worn on a Tuesday rather than left in a drawer.

Then there is the strap, which is the part that makes it adjustable. It is separate: a flat non-stretch band with hook-and-loop at one end. You lay it over the top of the foot, take it under the arch, bring it back around the ankle in a figure-8 and press it down. Wrap it firmly for a long day on your feet, wrap it lightly for a short one, or leave it off entirely and wear the sleeve on its own. One ankle brace, two levels of hold, and you decide each morning.

Being straight about it: a knit ankle brace is not a lace-up. There is no rigid panel in here and it will not lock anything down. What this ankle brace does is fit under a sock and inside a normal shoe without you thinking about it, which is exactly why it gets used on the days a stiffer brace stays in the cupboard.

Sizes run S to 2XL from your own heel-and-ankle measurement, taken off this brace’s own published chart rather than a generic one. Knit stretches, so the size you choose is also the compression you get: a size down holds firmer, a size up is easier to live in all day. Wider or thicker feet should take the larger one.

These are this brace’s own published measurements, not a generic guide. Run a soft tape around the heel and the ankle together, the way the maker’s own chart photo shows it, and read off the range.

  • S – 7"–9"
  • M – 9"–12"
  • L – 12"–14"
  • XL – 14"–16.5"
  • 2XL – 16.5"–19.5"

Measure the circumference right around the heel and the ankle together, the way the chart photo shows it. Because this is a knit, the size you take decides the compression: go one size down for a firmer hold, one size up for something you can forget about all day. Wider or thicker feet should take the larger size.

Both sleeves in the pack are the same size, and each one fits either foot.

Type: knit ankle brace with a detachable strap
Material: copper-infused nylon knit with 10% spandex
Construction: 3D knitted in one piece, open heel and open toe
Strapping: one flat adjustable strap per brace — figure-8 over the instep and under the arch
Quantity: 2 braces and 2 straps per pack
Fit: either foot; no left or right
Sizes: S · M · L · XL · 2XL
Care: hand wash cool, air dry flat

Free shipping on every U.S. order. No minimum.
Delivered in 5–9 business days after a 1–2 day handling time.
30-day returns – if the fit isn't right, send them back.

Two in the box. So one is always dry.

ankle-copper-pair_knit.png
ONE-PIECE KNIT

Knitted In One Piece

The sleeve comes off the machine already shaped, so there is no cut-and-sewn seam running under the sole and nothing to press into your foot inside a shoe. The heel comes out through the back and the toes stay free at the front, which is what lets this ankle brace go on in about two seconds.

  • Knitted In One Piece
  • The sleeve comes off the machine already shaped, so there is no cut-and-sewn seam running under the sole and nothing to press into your foot inside a shoe. The heel comes out through the back and the toes stay free at the front, which is what lets this ankle brace go on in about two seconds.
ankle-copper-pair_strap.png
DETACHABLE STRAP

The Strap Is The Adjustment

The strap is a separate flat band, not part of the knit, and it goes over the instep, under the arch and back around the ankle. Wrap it firm for a long day, wrap it light for a short one, or leave it off and wear the sleeve alone. That is two different braces in one box.

  • The Strap Is The Adjustment
  • The strap is a separate flat band, not part of the knit, and it goes over the instep, under the arch and back around the ankle. Wrap it firm for a long day, wrap it light for a short one, or leave it off and wear the sleeve alone. That is two different braces in one box.
ankle-copper-pair_weave.png
SMOOTH UNDERSIDE

Nothing Ridged Under The Sole

The underside is woven smooth, with no stitched nodes and no raised join where the panels meet. It is a small thing that decides whether an ankle brace disappears inside a shoe or reminds you it is there every few steps.

  • Nothing Ridged Under The Sole
  • The underside is woven smooth, with no stitched nodes and no raised join where the panels meet. It is a small thing that decides whether an ankle brace disappears inside a shoe or reminds you it is there every few steps.
ankle-copper-pair_pair.png
TWO OF EACH

Two Sleeves, Two Straps

One box covers both ankles, or covers one ankle on the days the first sleeve is still drying. Both are the same size and each fits either foot, so there is nothing to match up.

  • Two Sleeves, Two Straps
  • One box covers both ankles, or covers one ankle on the days the first sleeve is still drying. Both are the same size and each fits either foot, so there is nothing to match up.

Firm where it grips. Open where you bend.

ankle-copper-pair_claims.png
01

Knitted In One Piece

The sleeve comes off the machine already shaped, so there is no cut-and-sewn seam running under the sole and nothing to press into your foot inside a shoe.

02

The Strap Is The Adjustment

The strap is a separate flat band, not part of the knit, and it goes over the instep, under the arch and back around the ankle.

03

Nothing Ridged Under The Sole

The underside is woven smooth, with no stitched nodes and no raised join where the panels meet.

04

Two Sleeves, Two Straps

One box covers both ankles, or covers one ankle on the days the first sleeve is still drying.

How we compare.

What two knit braces and a strap do that one stretchy sleeve or a roll of tape cannot.

Ours
A single ankle sleeve
Athletic tape
Two complete braces in the pack
Knitted in one piece, no under-sole seam
Adjustable non-stretch figure-8 strap
Change the hold without taking it off
Thin enough to wear under a sock
Reusable — on again tomorrow

Frequently asked
questions.

The questions people actually ask before buying one.

Two. The pack is two knit sleeves and two adjustable straps — one complete ankle brace for each foot. Both are the same size, and each one fits either the left or the right.

Measure around the heel and the ankle together with a soft tape. S covers 7" to 9", M covers 9" to 12", L covers 12" to 14", XL covers 14" to 16.5" and 2XL covers 16.5" to 19.5". Because it is a knit, the size also sets the compression: take the smaller size for a firmer hold, the larger for something you can wear all day without noticing.

No, and plenty of people do not. The sleeve works on its own for everyday wear; the strap is there for the days you want the ankle brace to hold more firmly. Attach the hook-and-loop end onto the strap itself rather than onto the knit, which keeps the knit from pilling.

Yes. It is a thin knit with a smooth underside, so it goes under a sock and into a trainer or a work shoe without much argument. Add the strap and it gets a little bulkier across the top of the foot — enough that a tight dress shoe may object.

The nylon yarn is copper-infused, which is what gives the knit its tan patterning. It is a fibre treatment used for odour control in the fabric. We are not going to claim anything beyond that.

Close the hook-and-loop on the strap first so it does not grab the knit, then hand wash both in cool water with a mild detergent and dry them flat. Keep them off the radiator — heat is what kills the elastic. With two in the pack you can wash one and wear the other.

Stay in the loop.

The occasional new-arrival update. No spam.