Moulded-Seat Shower Chair Removable Arms and Back, Tool-Free

$47.99 $69.99

A moulded shower chair with arms and a back that unclip, and legs that set in half-inch steps.

Arms And Back Unclip Legs Adjust 16" To 20.5" 21.75" x 16.5" Seat Suction-Style Rubber Tips

Quantity

1

Free U.S. shipping · 30-day returns

This is the plain, sensible one. No swivel, no padding to look after, no hardware — a single moulded seat, a back, two arms, and four legs that adjust.

The seat and back are one-piece plastic, which is the reason it lasts in a bathroom: there is no fabric to stay damp, no coating to lift, and it cleans with an ordinary bathroom spray rather than anything abrasive. Drainage holes run through the seat so water never sits under you.

The arms and the backrest both unclip by hand. That takes about ten seconds and turns the chair into a plain bench, which is often what you want in a tub where the walls curve inwards.

Legs adjust from 16 to 20.5 inches in half-inch steps — finer than the usual one-inch chair — so you can land exactly on the height where your feet sit flat. Each leg ends in a suction-style rubber tip that holds on wet enamel, and the whole chair weighs 11.5 lb.

It supports up to 250 lb, which is lower than the aluminium-framed chairs. If you need a higher rating, one of those is the better buy.

Arms And Back Unclip
Legs Adjust 16" To 20.5"
21.75" x 16.5" Seat
Suction-Style Rubber Tips

Legs adjust 16" to 20.5" in half-inch steps. Seat 21.75" x 16.5", footprint 15.5" x 17". Moulded plastic seat and backrest, supports up to 250 lb, chair weighs 11.5 lb. Removable arms and backrest, drainage holes through the seat, suction-style rubber tips on the legs. Tool-free assembly, no abrasive cleaners needed.

There is nothing to size and nothing to fit — set the height to suit you and it is ready to use.

Type: Moulded-Seat Shower Chair
Key feature: a one-piece moulded seat with arms and a back that unclip in seconds
Quantity: one unit
Legs adjust 16" to 20.5" in half-inch steps. Seat 21.75" x 16.5", footprint 15.5" x 17". Moulded plastic seat and backrest, supports up to 250 lb, chair weighs 11.5 lb. Removable arms and backrest, drainage holes through the seat, suction-style rubber tips on the legs. Tool-free assembly, no abrasive cleaners needed.

Free shipping on every U.S. order. No minimum.
Delivered in 5–9 business days after a 1–2 day handling time.
30-day returns – if the fit isn't right, send them back.

Plain, and built to stay that way.

TEN SECONDS EITHER WAY

Arms And Back Unclip

Both arms and the backrest come off by hand, turning the chair into a plain bench for a tub with curved walls. Clip them back on when you want something to lean against.

Arms And Back Unclip
Both arms and the backrest come off by hand, turning the chair into a plain bench for a tub with curved walls. Clip them back on when you want something to lean against.

HALF-INCH STEPS

Legs Adjust 16" To 20.5"

Finer adjustment than the usual one-inch chair, so you can land exactly where your feet sit flat on the floor. Each leg sets on its own for an uneven tub base.

Legs Adjust 16" To 20.5"
Finer adjustment than the usual one-inch chair, so you can land exactly where your feet sit flat on the floor. Each leg sets on its own for an uneven tub base.

SIZED FOR A TUB

21.75" x 16.5" Seat

A 15.5" x 17" footprint that fits most tub styles, weighing 11.5 lb so it lifts in and out easily. Supports up to 250 lb.

21.75" x 16.5" Seat
A 15.5" x 17" footprint that fits most tub styles, weighing 11.5 lb so it lifts in and out easily. Supports up to 250 lb.

HOLDS ON WET ENAMEL

Suction-Style Rubber Tips

Each leg ends in a suction-style tip that grips a wet tub floor instead of skating on it, and the seat drains through so nothing pools around them.

Suction-Style Rubber Tips
Each leg ends in a suction-style tip that grips a wet tub floor instead of skating on it, and the seat drains through so nothing pools around them.

WHAT COMES WITH ITFree U.S. shipping30-DAY RETURNSTool-free assemblyRUST-RESISTANT FRAMEShips in 1–2 days

Built for everyday support.

01

Arms And Back Unclip

Both arms and the backrest come off by hand, turning the chair into a plain bench for a tub with curved walls.

02

Legs Adjust 16" To 20.5"

Finer adjustment than the usual one-inch chair, so you can land exactly where your feet sit flat on the floor.

03

21.75" x 16.5" Seat

A 15.5" x 17" footprint that fits most tub styles, weighing 11.5 lb so it lifts in and out easily.

04

Suction-Style Rubber Tips

Each leg ends in a suction-style tip that grips a wet tub floor instead of skating on it, and the seat drains through so nothing pools around them..

How we compare.

The plain, sensible chair — and where its limits are.

Ours

A fixed bath chair

A plain plastic stool

Arms and back unclip by hand

Legs adjust in half-inch steps

Suction-style tips on every leg

One-piece moulded seat, no fabric

Weighs 11.5 lb

Supports up to 250 lb

Frequently asked
questions.

The questions people actually ask before buying one.

Half-inch steps from 16" to 20.5" — finer than the usual one-inch chair, so you can land exactly on the height where your feet sit flat on the floor.

Up to 250 lb. That is lower than the aluminium-framed chairs in this range; if you need a higher rating, one of those is the better buy.

Both unclip by hand in about ten seconds, turning the chair into a plain bench — often what you want in a tub whose walls curve inward.

A 21.75" x 16.5" seat on a 15.5" x 17" footprint, and the chair weighs 11.5 lb, so it lifts in and out of the tub easily.

Each leg ends in a suction-style rubber tip that grips a wet tub floor, and the seat drains through so water does not pool around them.

A one-piece moulded plastic seat and backrest. There is no fabric and no coating to lift, so an ordinary bathroom spray is enough — abrasive cleaners are not needed.

No. It pushes together by hand and comes apart the same way for storage.

Free U.S. shipping and a 30-day return window, so you can set the height and try it in your own tub.