Wrist Brace, Copper-Infused – Mouldable Support Bar

Wrist Brace copper-infused nylon

$27.99

A copper-infused wrist brace with a support bar you bend to your own hand, then leave set.

The Support Bar Bends To Your Hand Where The Straps Sit Is The Whole Trick Copper In The Fibre, Not On It Made To Be Worn While You Do Things
Quantity
1
Hand·Right
Size·S/M

Free U.S. shipping · 30-day returns

Every hand is a slightly different shape, and every rigid wrist brace is made to one. That is why a wrist brace can be the right size and still sit wrong — the bar underneath is holding your wrist at somebody else’s angle.

The support bar in this wrist brace is meant to be bent. Take it to the angle your hand actually rests at, put the wrist brace on, and it holds that from then on. It is a two-minute job you do once, and it is the difference between a wrist brace you wear and one in a drawer.

The shell is a knitted nylon with copper infused into the fibres themselves rather than coated on, so it does not wash out. Practically that means a wrist brace that wicks and stays fresher through a long week than plain neoprene manages. Hand wash it with soap, air dry, and it comes back the same shape.

Two hook-and-loop straps close the wrist brace, and where they sit is the whole trick: the upper one across the heel of the hand, the lower one further down the forearm. Set that way it will not rotate. Set both in the middle and it will roll round your arm by lunchtime.

It is handed — each wrist brace is cut for one wrist — in S/M and L/XL. The maker does not publish measurement ranges for those two sizes, so rather than invent numbers: measure your wrist, and if you are between or unsure, message us before you order.

  • The Support Bar Bends To Your Hand
  • Where The Straps Sit Is The Whole Trick
  • Copper In The Fibre, Not On It
  • Made To Be Worn While You Do Things

Two sizes, S/M and L/XL, each cut for one hand. The maker does not publish a measurement range for them and we are not going to invent one — measure around your wrist and, if you are unsure or between the two, message us before you order and we will help you pick.

Then pick your hand. Left and right are mirror-image parts, so choose the side you actually want to wear it on — the other one will not lie flat.

Type: copper-infused wrist brace with a mouldable support bar
Shell: knitted nylon, copper infused into the fibre
Support bar: flat internal bar along the underside — bend to shape
Straps: two hook-and-loop straps — heel of hand and forearm
Hands: Right · Left (shaped for one hand each)
Sizes: S/M · L/XL
Quantity: one brace
Care: hand wash with soap, air dry

Free shipping on every U.S. order. No minimum.
Delivered in 5–9 business days after a 1–2 day handling time.
30-day returns – if the fit isn't right, send them back.

Bend the bar once. Then forget it.

wrist-copper_mould.png
SHAPES TO YOU

The Support Bar Bends To Your Hand

The bar along the underside is meant to be bent. You set the angle your hand actually sits at rather than accepting whatever angle the factory chose, and the wrist brace then holds that. Nobody’s wrist is the shape of a template.

  • The Support Bar Bends To Your Hand
  • The bar along the underside is meant to be bent. You set the angle your hand actually sits at rather than accepting whatever angle the factory chose, and the wrist brace then holds that. Nobody’s wrist is the shape of a template.
wrist-copper_straps.png
TWO STRAPS

Where The Straps Sit Is The Whole Trick

Put the upper strap across the heel of the hand and the lower one further down the forearm, and the brace stops rotating. Put them both in the middle and it will roll round your arm by lunchtime. The positions are marked; they are worth respecting.

  • Where The Straps Sit Is The Whole Trick
  • Put the upper strap across the heel of the hand and the lower one further down the forearm, and the brace stops rotating. Put them both in the middle and it will roll round your arm by lunchtime. The positions are marked; they are worth respecting.
wrist-copper_copper.png
COPPER-INFUSED

Copper In The Fibre, Not On It

The copper is infused into the nylon fibres themselves rather than coated on the surface, so it does not wash out over time. What you notice day to day is a knit that wicks and stays fresher than plain neoprene through a long week.

  • Copper In The Fibre, Not On It
  • The copper is infused into the nylon fibres themselves rather than coated on the surface, so it does not wash out over time. What you notice day to day is a knit that wicks and stays fresher than plain neoprene through a long week.
wrist-copper_work.png
WORKS WITH YOU

Made To Be Worn While You Do Things

The palm is open, the thumb has its own hole and nothing crosses the fingers, so a keyboard, a steering wheel and a screwdriver all still work. It is a firm support rather than a rigid splint, and that is deliberate — this one is built to be worn while you get on with the day.

  • Made To Be Worn While You Do Things
  • The palm is open, the thumb has its own hole and nothing crosses the fingers, so a keyboard, a steering wheel and a screwdriver all still work. It is a firm support rather than a rigid splint, and that is deliberate — this one is built to be worn while you get on with the day.

Shaped to your wrist, not a template.

wrist-copper_claims.png
01

The Support Bar Bends To Your Hand

The bar along the underside is meant to be bent.

02

Where The Straps Sit Is The Whole Trick

Put the upper strap across the heel of the hand and the lower one further down the forearm, and the brace stops rotating.

03

Copper In The Fibre, Not On It

The copper is infused into the nylon fibres themselves rather than coated on the surface, so it does not wash out over time.

04

Made To Be Worn While You Do Things

The palm is open, the thumb has its own hole and nothing crosses the fingers, so a keyboard, a steering wheel and a screwdriver all still work.

How we compare.

What a bendable bar changes about how a brace actually sits.

Ours
A fixed-splint brace
An elastic wrap
Support bar you bend to your own hand
Copper infused into the fibre
Two straps, positioned to stop rotation
Open palm and free thumb
Made hand-specific, left or right
Low enough profile to work in

Frequently asked
questions.

The questions people actually ask before buying one.

Yes — that is the point of it. Bend it gently to the angle your hand naturally rests at before you wear the brace, and it holds that shape from then on. It is a once-only job.

Each brace is shaped for one wrist, so choose the side you mean to wear it on. Right and left are not interchangeable.

It comes in S/M and L/XL. The maker does not publish a measurement range for either, so we are not going to quote one — measure around your wrist and message us if you are unsure, and we will help you pick. Returns are free within 30 days if you get it wrong.

Upper strap across the heel of the hand, lower strap further down the forearm. Both in the middle and the brace will rotate. That spacing is what stops it moving.

No. It is infused into the nylon fibre rather than applied to the surface, so it stays there for the life of the fabric.

Yes — it is built for that. Open palm, free fingers, separate thumb hole, low profile. Typing, driving and hand tools are all fine.

Hand wash with soap and air dry. It stands up to washing without stretching or losing its shape, but keep it away from the tumble dryer.

Free U.S. shipping and a 30-day return window, so you can measure, wear it for a few nights and send it back if the fit is wrong.

Stay in the loop.

The occasional new-arrival update. No spam.